Filter
Top Products
Page 3SKU 67102 For technical questions, please call 1-800-444-3353.
Avoid body contact with grounded b.
surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
Do not expose power tools to rain c.
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use d.
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
of electric shock.
When operating a power tool e.
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
If operating tool in a damp location f.
is unavoidable, use a Ground Fault
Circuit Interrupter (GFCI) protected
supply. Use of a GFCI reduces the
risk of electric shock.
Personal safety3.
Stay alert, watch what you are a.
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the inuence of
drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
Use safety equipment. b. Always
wear ANSI-approved safety goggles,
heavy-duty work gloves and face
shield during use.
Do not overreach. Keep proper c.
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
Power tool use and care4.
Do not force tool. Use the correct a.
tool for your application. The
correct tool will do the job better
and safer at the rate for which it was
designed.
Disconnect the plug from the b.
power source and/or the battery
pack from the tool before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
Store idle tools out of the reach of c.
children and do not allow persons
unfamiliar with the tool or these
instructions to operate the power
tool. Welding tools are dangerous in
the hands of untrained users.
Maintain welding tools. Check for d.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect
the tool’s operation. If damaged,
have the tool repaired before use.
Many accidents are caused by poorly
maintained tools.
Keep cutting tools sharp and e.
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
Use the tool and accessories f.
in accordance with these
instructions, taking into account
the working conditions and the
work to be performed. Use of the
tool for operations different from