Filter
Top Products
Page 5SKU 67102 For technical questions, please call 1-800-444-3353.
harm. Some examples of these
chemicals are:
cement or other masonry products
chemically treated lumber
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
particles. (California Health & Safety
Code § 25249.5, et seq.)
The warnings, precautions, 18.
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
GROUNDING
TO PREVENT
ELECTRIC SHOCK
AND DEATH FROM
INCORRECT GROUNDING
WIRE CONNECTION: Check
with a qualied electrician if
you are in doubt as to whether
the outlet is properly
grounded. Do not modify plug
provided with tool. Never
remove grounding prong from
plug. Do not use tool if power
cord or plug is damaged. If
damaged, have it repaired by
a service facility before use. If
plug will not t outlet, have a
proper outlet installed by a
qualied electrician.
Grounded Tools: Tools with Three
Prong Plugs
Tools marked with “Grounding 1.
Required” have a three wire cord and
three prong grounding plug. Plug
must be connected to a properly
grounded outlet. If tool should
electrically malfunction or break
down, grounding provides a low
resistance path to carry electricity
away from user, reducing risk of
electric shock. (See 3-Prong Plug
and Outlet.)