Filter
Top Products
SKU 67119 For technical questions, please call 1-800-444-3353. Page 11
SPECIFICATIONS
Power 1-1/2 HP
Electrical Input 120 V~ / 60 Hz / 10 A
Motor Speed
11,000 - 28,000 RPM (No
Load)
Collet Capacity 1/4”
Maximum
Plunge
2-1/8”
Depth
Measurements
1/16” increments
Depth Stop 4-stage turret stop
E194601
93MA
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight
Tools at 1-800-444-3353 as soon as possible.
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool off and unplug the tool
from its electrical outlet
before set up, assembly, or
making any adjustments to
the tool.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Functions
Trigger
Switch
(60)
Depth
of Cut
Scale
Collet Nut (50)
Dust Extraction
Adapter
Speed Adjuster (4)
Pointer
(28)
Chip Shield (70)
Plunge Lock
Lever (32)
Depth
Stop Bar
(30)
Thumb
Screw
Thumb
Screw
(81)
Base Plate
Figure 1
Edge Guide
Spanner
Wrench (51)
Thumb Screw (81)
Adjusting
Knob (26)
Spindle
Spindle
Lock
Button
(46)
Depth
Stop
Turret
(67)
Lock-on Button