Filter
Top Products
SKU 67119 For technical questions, please call 1-800-444-3353. Page 16
MAINTENANCE AND
SERVICING
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool off and unplug the tool
from its electrical outlet
before performing any
inspection, maintenance, or
cleaning procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE,1. inspect the
general condition of the tool. Check
for loose hardware, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
AFTER USE,2. wipe external surfaces
of the tool with a clean cloth. Do not
use any abrasive or solvent-based
cleaners.
Regularly clean all ventilation open-3.
ings by periodically brushing with a
soft brush and/or blowing clear with
compressed air.
4. WARNING! If the supply cord of
this power tool is damaged, it must
be replaced only by a qualied
service technician.