Filter
Top Products
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed in the following
pages may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
SKU 91511 PAGE 2
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 17
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
Item Description
Electrical Requirements 120 V / 60 Hz / 3400 RPM
1/2 HP / Single Phase Motor
Start Up AMPs: 10.2
Circuit Breaker: 120V
3 Prong, Grounded, Power Cord Plug
Cutting Capacity Up to 1-1/4” Thick
Blade Size/Type 7” Diamond With 5/8” Round Arbor Hole
*Must Be Rated At 3600 RPM Or Greater
(Diamond Blade not included; sold separately)
Arbor Size 5/8” Diameter
Angle Cutting Capacity Right Side of Table Tilts At:
15°, 30°, 45°, 60°
Water Compartment 13” L x 6-1/4” W x 5-13/16” Deep
Maximum Water Depth: 1-1/2”
Overall Dimensions 15-5/8” L x 15-3/4” W x 6-1/2” H
Weight 16.3 Pounds
REV 07j; 09e
Note: Sku 67111 7” Diamond Blade (wet) and Sku 67047 7” Diamond Turbo Blade (wet/dry) will
fit this Tile Saw. Both blades are sold separately and are available from Harbor Freight Tools.