SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 12
Once the proper fuel mix is obtained, remove the Fuel Tank Cap (16C). Fill the Fuel
Tank (2C, 10C) approximately 3/4 full with the fuel mix (the Fuel Tank capacity is
0.4 gallons). Then, replace the Fuel Tank Cap. (See Figure A.)
FUEL MIX QUANTITIES
Ratio Two Cycle Oil Unleaded Gasoline (91 Octane)
50:1 4 Fl. Oz. 1.5 Gal.
50:1 8 Fl. Oz. 3 Gal.
50:1 16 Fl. Oz. 6 Gal.
Table A
OPERATING INSTRUCTIONS
Note: Please read and familiarize yourself with the How To Stop The Cut Off Saw
instructions on page 13 before operating.
To Start The Cut Off Saw:
WARNING! Wear ANSI-approved safety impact goggles, hearing protection, and
NIOSH-approved dust mask/respirator during use.
Place the Cut Off Saw on flat, level ground, so that the Saw Blade (23F) does not
contact any objects or the ground. Orient the saw away from your body.
FIGURE B
7B
3G
9D
10D
5C
3A
1D
5D
Pull the Throttle Trigger (10D) all the way back, press down on the Full Throttle Lock
Button (9D) and Release the Throttle Trigger (10D). (See Figure B.)
3.
1.
2.
3.
REV 07e