Filter
Top Products
SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 5
Never store fuel or other flammable materials near the Cut Off Saw.
Do not smoke, or allow sparks, flames, or other sources of ignition around
the Cut Off Saw.
Keep grounded conductive objects, such as tools, away from exposed, live
electrical parts and connections to avoid sparking or arcing. These events
could ignite fumes or vapors.
Do not refill the Fuel Tank while the Engine is running or while the Engine is
still hot. Do not operate the Cut Off Saw with known leaks in the fuel system.
MECHANICAL PRECAUTIONS
Prior to performing service, maintenance, or cleaning procedures, always
make sure the Engine is off. Allow the Engine and Cut Off Saw to
completely cool. Then, remove the spark plug from the Engine.
Do not alter or adjust any part of the Cut Off Saw or Engine that is assembled
and supplied by the manufacturer.
Always follow scheduled Cut Off Saw and Engine maintenance.
CHEMICAL PRECAUTIONS
Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.
Avoid body contact with fuels, oils, and lubricants used in the Cut Off Saw and
Engine. If swallowed, seek medical treatment immediately. Do not induce vomiting
if fuel is swallowed. For skin contact, immediately wash with soap and water. For
eye contact, immediately flush eyes with clean water.
NOISE PRECAUTION
Prolonged exposure to high noise levels is hazardous to hearing. Always wear
ANSI-approved hearing protection when operating or working around the Cut Off
Saw when it is running.
SAW BLADE PRECAUTIONS
Only use Saw Blades with the following specifications:
14” Diameter.
From 7/64” to 1/4” thickness.
1” Diameter spindle mounting hole.
4.
5.
6.
7.
1.
2.
3.
1.
2.
1.
a.
b.
c.