Filter
Top Products
SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 9
Front Handle (3G): Use to securely hold the Cut Off Saw when operating.
Spark Plug Cover (4D): A removable cover for access to the Spark Plug (2B).
Kill Switch (5D): Engine stops when this switch is pressed and held.
Full Throttle Lock Button (9D): To lock the Throttle Trigger (10D) in wide open
position, press this button while the Throttle Trigger is fully depressed. Pressing and
releasing the Throttle Trigger will return the Throttle Trigger to its idle position.
Throttle Trigger (10D): Controls the Engine speed. Pulling back on the Throttle
Trigger opens the throttle and the Engine accelerates. Releasing the Throttle Trig-
ger slows down the Engine.
Rear Handle (7D): Use to securely hold the Cut Off Saw when operating.
Filter Cover Lock Lever (13E): Locks the Air Filter Cover (1E). Pull back on the
Filter Cover Lock Lever to open the Air Filter Cover.
Pre-Filter 1 (2E), Pre-Filter 2 (3E), Filter Housing (4E), Paper Air Filter (5E),
Secondary Filter (6E): Filters the air, preventing dirt and debris from entering the
Carburetor (7C).
Choke Lever (5C): Turning this Lever counterclockwise closes the Carburetor.
Use the Choke Lever to prime the Engine (cold starting). Turn clockwise for normal
operation.
Starter Grip (3A): Pull to start Engine.
Fuel Tank Cap (16C): Open this Cap for filling the Fuel Tank (2C, 10C). Close the
Fuel Tank Cap prior to for starting and operation.
Decompression Valve (7B): Press down on this Valve to make starting easier.
When air pressure in the Engine reaches a preset value, the Valve automatically
closes.
Belt Tensioner with Tensioning Nut (35F): For V-Belt tension adjustment. Turn
the Nut clockwise to loosen the V-Belt. Turn the Nut counterclockwise to add more
tension to the V-Belt.
Muffler (9B): Reduces both noise and emissions.
Blade Guard Positioning Knob (38F): Loosen the Knob to adjust the Blade Guard
(19F) position.
Shaft Lock (34F): Press and hold the Shaft Lock to facilitate Saw Blade (23F)
changing and installation.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
REV 07e