Filter
Top Products
Page 5For technical questions, please call 1-800-444-3353.SKU 95136
SAFETYSERVICE OPERATIONTECHNIQUES SETUP
Specications
Rated Input 240V~, 50/60Hz, 19.2A
Rated Duty Cycle
60%
80%
100%
@
@
@
40 A
34.6 A
31 A
Air Requirements 3.5 CFM @ 60-80 PSI
Power Switch Rocker Type
Weight 49.6 lb.
Cutting Current 15-40 A
Cutting Thickness 1/2″ Mild Steel Maximum
Arc Striking System Pilot Arc
Unit Size 20″ L x 8-1/8″ W x 14-3/8″ H
Air Inlet 1/4″ - 18 NPT
Duty Cycle
Duty Cycle is the equipment specication which denes the number of minutes
within a 10 minute period that a piece of equipment can safely operate.
This plasma cutter has a 60% duty cycle at 40 Amps, which means that it may be used only
6 minutes at 40 Amps out of any 10 minute period, and must be rested the remaining 4 minutes.
CAUTION: Failure to observe the duty cycle limitations of this Plasma Cutter
can easily damage this equipment, and will void the warranty.