Filter
Top Products
Page 6 For technical questions, please call 1-800-444-3353. SKU 95136
SAFETY SERVICEOPERATION TECHNIQUESSETUP
Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Note: This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.
Grounding
1. Attach a ground wire of at least 14 Ga.
thickness (not supplied) to the screw on the
lower left of the back of the tool case.
2. Connect the other end of the wire to an
appropriate ground, such as a steel workbench,
steel building member or grounding stake.