Filter
Top Products
REVIEW DRAFT—CISCO CONFIDENTIAL
Appendix A Repackaging the Router
Repackaging the Routers
A-6
Cisco XR 12416 Router Chassis Installation Guide
OL-xxxxx-xx
Tools and Equipment
You need the following items to remove the router from the equipment rack and
repackage it for shipping:
• ESD-preventive wrist strap
• Flat-blade screwdrivers
• Number 1 and number 2 Phillips screwdrivers
• 3/8-inch (10-mm) nutdriver (for systems equipped with the DC-input power
shelf)
• 9/16-inch (14-mm wrench) wrench
• 3/4-inch (19-mm) socket and ratchet wrench
• Safety hand truck with retractable safety leg wheels and security strap, such
as the Stevens Appliance Truck Company “Escort,” Model STEV SRT-M-66
(distributed by McMaster-Carr as Model 2654T6), or an equivalent safety
hand truck.
• Antistatic sacks or other ESD-preventive storage environment
• The original router shipping package supplied by Cisco. If you do not have
the original router shipping package, contact your Cisco service
representative for assistance.
Safety Recommendations
Before you begin the procedures in this appendix, review the following safety
information:
• The safety recommendations listed in the“Safety Recommendations” section
on page 2-2 in Chapter 2, “Preparing for Installation.”
• The safety warnings listed in the publication Regulatory Compliance and
Safety Information for the Cisco 12000 Series Internet Router that
accompanied your router