Filter
Top Products
2-7
Cisco 828 Router and SOHO 78 Router Hardware Installation Guide
78-12837-02
Chapter 2 Installation
Installing Your Router
Connecting Hubs
Before connecting a hub, see Table 2-2. To connect one of these devices, follow
the steps in Figure 2-1.
Figure 2-1 Connecting a Hub
To verify your hub connection, ensure that the appropriate Ethernet LED on the
front panel is on after you have completed the router installation. For example, if
you have connected the cable to Ethernet port 3, ensure that the ETHERNET 3
LED on the front panel is on.
If the LED is not on, see Table 3-2 in Chapter 3 for troubleshooting information.
56634
Cisco 1528 Micro Hub 10/100
Cisco 828 router
2. Connect yellow cable
to ETHERNET 4 port
on Cisco 828 or
SOHO 78 router.
1. Set TO HUB/TO PC button.
MDI MDI-X
6X 7X
8X
1X
2X 3X
4X
ETHERNET
1
SPEED
100BaseTX
10BaseT
LED
SOLID
BLINK
2
3
4
5
6
7 8
3. Connect other
end of cable
to hub.
4. If applicable, check
setting of hub
equivalent of router
TO HUB/TO PC button.
+5 V
D
C
ETHERNET 10 BASE T
CONSOLE
G.SHDSL
4
3
2
1
TO HUB
TO PC
Model Cisco 828