Filter
Top Products
3-3
Cisco 828 Router and SOHO 78 Router Hardware Installation Guide
78-12837-02
Chapter 3 Troubleshooting
Problems During First Startup
No connection to
G.SHDSL link.
(The CD LED on
the front panel is
off for a long
time.)
Wrong cable. To make sure that you are using the correct cable, see
Appendix A.
Improperly connected
cable.
• To make sure that you have cabled the router
properly, see Figure 2-3 in Chapter 2, “Installation.”
• Make sure that the connectors at both ends of the
cable are securely seated.
Table 3-1 Problems During First Startup (continued)
Symptom Problem Solutions