Filter
Top Products
Chapter 2 Installation
Installing Your Router
2-8
Cisco 828 Router and SOHO 78 Router Hardware Installation Guide
78-12837-02
Connecting a Server, PC, or Workstation
Before connecting the server, PC, or workstation, see Table 2-2 to determine how
to set the router TO HUB/TO PC button.
To connect one of these devices, follow the steps in Figure 2-2.
Figure 2-2 Connecting a Server, PC, or Workstation
To verify your connection, ensure that the appropriate Ethernet LED is on after
the router installation. For example, if you have connected the cable to Ethernet
port 4, ensure that the ETHERNET 4 LED on the front panel is on.
If the LED is not on, see Table 3-2 in Chapter 3 for troubleshooting information.
56635
PC
AUX
SER 0
ETH
OK
LAN
3. Connect other end of cable
to server, PC, or workstation.
2. Connect yellow cable
to ETHERNET 4 port
on Cisco 828 or
SOHO 78 router.
1. Set TO HUB/TO PC button.
Cisco 828 router
+
5 V
D
C
ETHERNET 10 BASE T
CONSOLE
G.SHDSL
4
3
2
1
TO HUB
TO PC
Model Cisco 828