Cisco Systems ASR 1004 Router User Manual


 
33
Figure 13 Cisco ASR 1004 Router DC Power Supply Grounding Wire and Stud
Step 5 Attach the other end of the ground cable to the site ground connection.
Caution Before you continue to install the terminal block ground wires, stop and perform Step 6. To prevent any contact
with metal lead on the ground wire and the plastic cover.
Step 6 You must wrap the positive and negative cables with sleeving. Take each wire and cover the area from the lug to the
wire with heavy shrink sleeving.
Step 7 Replace the ground lug with cable in the following order:
a. Flat Washer
b. Ground lug with the positive and negative wire
c. Kepnut screw
Figure 14 Cisco ASR 1004 Router DC Power Supply Terminal Block
1
Ground lug and positive lead wire
4
Washer
2
Terminal block and positive stud
5
Kepnut screw
3
Earth grounding symbol
Crimp area
25527
2.24
0.48
0.08
0.25 0.370.63
End View
Ø 0.267
2 holes
All measurements in inches
280187
2
5 4 3
1