Filter
Top Products
STARTING A CUT
IMPORTANT:
BEFORE using the Twin Cutter Saw for the first time, ALWAYS familiarize yourself
with the saw by making practice cutsin scrap materials,
The weight of this saw helps to make the cuts smoother_Learn how to safely handle
and control the weight of the sawn
ALWAYS be sure that you positionthe blades perpendicular to the plane of the
workpiece. Make the cut at an approximate 30° angle tothe workpiece surface,
(See Fig_5),,
Practice the proper feed speed rate for the materials being cut.
Engage f.he onloff switch to start the saw,ALWAYS let the blades reach full speed
before you begfn the cut intothe workpiece,
IMPORTANT:When using your saw, ALWAYS stay alert and exercise control.
DO NOT remove your saw from the workpiece, while the blade is moving.
Blades perpendicular to workplace
Approximately 30°
Z_ WARNING: ALWAYS
maintain proper control of the saw
to make sawing safer and easier_
Loss of control of the saw could
cause an acctdent resulting in
possible serious Injury,
Fig, 6
Wrong
NEVER hold the saw with just
one hand (see Hg_6).,
DUTY CYCLE
Correct
ALWAYS hold saw by motor body and
assist handle (see Fig°7),
30 minutes on 10 minutesoff dutycyclereferstoshort-time operation°Short
timeoperationdenotesoperationundernormalloadfor a specifiedperiodand
material,startingcoid,theintervalbetweeneachperiodofoperationbeingsufficient
toallowthetoo!tocooldownapproximatelytoroom temperature_
12