Filter
Top Products
REMOVING BLADES FROM SAW cont, (See Figs, 12- 15)
Fig. 13
Fig, 14
!
Fig. 15
ATTACHING REPLACEMENT BLADES TO THE SAW (See Figs. 16 - 19)
i ii i i
1_ WARNING: This Twin Cutter saw uses specially designed 61/a-in.blades
and no other types or sizes of blades shouldever be used, Other types and sizes
i of blades wlll not operate safely in this saw and could result inserious personal
I iojury.
See the accessoriessection of this manualfor the proper replacementblades
that are neededfor this saw.
1. Unplugthe sawn
2. Lay the saw down with the blade arbor pointingupward.
3oPlace blade "A" onto the blade flange with the "A" clearlyvisible (see Fig. 16).
4. Align the holes on the blade with the pins on the flange and securely fit the blade
on the flange (see Fig. 17)o
5. Place blade "B" onto the arbor with the "B" easily visible, then thread lock nut
onto shaft, DO NOT tighten, (see Fig° 18)o
6. Turn the blades so that the holes in both blades are lined up.
18
| !