Filter
Top Products
PARTSLIST (Fig. 1)
1. Fixed Baseand Motor with1/2-in.Collet/Nut (_
2. Sawdust
Extraction Hood
3. 2 Screws _p
(for attaching Hood) _p
4. 1/4-in. Collet/Nut
5. Collet/Nut Wrench
KNOWYOUR FIXED BASE ROUTER (Fig. 2)
I OTE: Before attempting to use your router, familiarize yourself with all of the
operating features and safety requirements.
Your fixed base router has a precision-built electric motor and it should only be connected
to a 120-volt, 60-Hz AC ONLY power supply (normal household current).DO NOT operate
on direct current (DC). This large voltage drop will cause a loss of power and the motor
will overheat: If the router doesnot_operate when pluggedinto-a correct 120-vott,
60-Hz AC ONLY outlet, check the power supply. This router has an 8-fL, 2-wire power
cord (no adapter needed).
11