Filter
Top Products
to/03io1 WED 13:45 FAX 864 964 3314 RYOBI OUSTO_R SERVICE _oo9/o15
SWITCH
See Figure 2.
To turn yourddll ON. depress the switchtrigger.To
turn it OFF, release the switchtrigger.
SELECTOR
Fig. 2
VARIABLE SPEED
This tool has avariablespeed switchthatdelivershigher
speed andtorquewithincreasedtriggerpressure.Speed
iscontrolledby the amount of switch triggerdepression.
Note: You might hear e whistlingor ringingnolsefrom
the switchduring use. Do notbe concerned,thisis a
normal part of theswitch function.
TWO-SPEED GEAR TRAIN
See F_gure 3.
Your drill has a two-speed gear train designed for
drilUng or driving at HI or LO speeds. A slide switch is
located on top of your drill to select either HI or LO
speed. When using drill in the HI speed range, speed
will increase end unit will have less power and torque.
When using drill In the LO speed range, speed will
decrease and unit will have more power and torque.
Use HI speed for fast ddlling or driving applications
and LO speed for high power and torque applications.
LOSPEED TWOSPEED
HISPEED _ GEARTRAIN(HI-I.O)
TO INSTALL BATTERY PACK
• Lock switohtdggeron yourdrill byplacing the
directionof rotationselector in centerposition.
See Fi#um 5.
• Place battery pack inyourdrill.Alignraised rib
insidedrill with grooveon batterypack.
Sos Figure 4.
BAITERY PACK
LATCHES
DEPRESSLATCHESTO
RELEASEBAI"rERYPACK
Fig, 4
[] Make sure the latcheson each sideof your battery
pack snap in place and batterypack is secured in
ddll before beginningoperation.
_IL drill,CAUTION: y°Urbesure raisedribinside ddllalignswith
When
placing batterypack
in
groove on battery pack and latchessnap into
plaoe properly. Improperassembly of battery
pack can cause damage to internalcomponents.
TO REMOVE BAI"TERY PACK
• Lock switch trigger on your ddll by placing the
direction of rotation selector in center position.
See Figure 5.
• Locate latches on end of battery pack and depress
to release battery pack from your ddll,
See F_Jm 4.
[] Remove battery pack from your drill.
Fig. 3
8