Crestron electronic TPS-6X-BTP Battery Charger User Manual


 
Crestron TPS-6X-BTP Battery Pack for TPS-6X
6. Using the flat end of a small slot head screwdriver, gently separate
the multi-pin connector from the corresponding connector on the
circuit board of the TPS-6X. (Refer to illustration below.)
TPS-6X-BTP Connector on TPS-6X
7. Remove battery cells with the connecting wires attached, from
either side of the assembly.
Installation Guide – DOC. 6740A Battery Pack for TPS-6X: TPS-6X-BTP 7