Filter
Top Products
Battery Pack for TPS-6X Crestron TPS-6X-BTP
Specifications
Specifications for the TPS-6X-BTP are listed in the following table.
TPS-6X-BTP Specifications
SPECIFICATION DETAILS
Output Voltage 4.8 Volts DC
Capacity 2000 mAh
Composition Nickel Metal Hydride (NiMH)
Usage Per Charge ~2 hours continuous, ~24 hours
under normal use (10% active duty
cycle with standby/powerdown
activated
Charging Time ~2.5 hours
(~2.5 to 3 hours when in use)
Optimal Operating
Temperature
32º to 112º F (0º to 45º C)
50º to 104º F (10º to 40º C) when
charging
Weight 4.3 oz (120.2 g)
NOTE: The batteries will not charge when they are warmer than the
maximum charging temperature. This may occur due to extended use of
the panel while on the TPS-6X-DS (or TPS-6X-DS-C) Docking Station.
To cool the batteries, turn off power to the touchpanel using the left
trigger key. The touchpanel will cool faster if it is removed from the
TPS-6X-DS (or TPS-6X-DS-C) before it is turned off. The panel will be
cool in approximately 20 minutes.
2 • Battery Pack for TPS-6X: TPS-6X-BTP Installation Guide – DOC. 6740A