Filter
Top Products
Appendix—Manual Configuration of iSCSI 73
NOTE: Configure the management station you are using for network
communication to the same IP subnet as the PowerVault MD36
x
0i host ports.
1
Establish an iSCSI session to the PowerVault MD3600i RAID storage array.
2
Restart the
SMagent
service.
3
Launch MDSM.
If this is the first storage array to be set up for management, the
Add New
Storage Array
window is displayed. Otherwise, click
New
.
4
Select
Manual
and click
OK
.
5
Select In-band management and enter the host server name(s) or IP
address(es) of the host server that is running the MD Storage Manager
software.
6
Click
Add
.
In-band management should now be successfully configured.
book.book Page 73 Thursday, July 18, 2013 5:56 PM