Filter
Top Products
8
EXTENSION CORDS
USE PROPER EXTENSION CORDS.
MAKE SURE YOUR EXTENSION CORD IS IN GOOD
CONDITION AND IS A 3-WIRE EXTENSION CORD
WHICH HAS A 3-PRONG GROUNDING TYPE PLUG
AND MATCHING RECEPTACLE WHICH WILL
ACCEPT THE MACHINE’S PLUG. WHEN USING AN
EXTENSION CORD, BE SURE TO USE ONE HEAVY
ENOUGH TO CARRY THE CURRENT OF THE
MACHINE. AN UNDERSIZED CORD WILL CAUSE
A DROP IN LINE VOLTAGE, RESULTING IN LOSS
OF POWER AND OVERHEATING. FIG. D-1 SHOWS
THE CORRECT GAUGE TO USE DEPENDING ON
THE CORD LENGTH. IF IN DOUBT, USE THE NEXT
HEAVIER GAUGE. THE SMALLER THE GAUGE
NUMBER, THE HEAVIER THE CORD.
Fig. D-1
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Rating Volts
Total
Length of
Cord in
Feet
Gauge of Extension
Cord
0-6 120
up to
25 18 AWG
0-6 120 25-50 16 AWG
0-6 120 50-100 16 AWG
0-6 120 100-150 14 AWG
6-10 120
up to
25 18 AWG
6-10 120 25-50 16 AWG
6-10 120 50-100 14 AWG
6-10 120 100-150 12 AWG
10-12 120
up to
25 16 AWG
10-12 120 25-50 16 AWG
10-12 120 50-100 14 AWG
10-12 120 100-150 12 AWG
12-16 120
up to
25 14 AWG
12-16 120 25-50 12 AWG
12-16 120
GREATER THAN 50 FEET NOT RECOMMENDED
FOREWORD
FUNCTIONAL DESCRIPTION
The Delta DP300L 12" Drill Press comes with a flexible work lamp, a laser guide for precise drilling and a utility tray for
keeping tools within easy reach. This machine has a tilting table for angle drilling and side edges and parallel slots for
fast workpiece clamping.
NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in the
manual are representative only and may not depict the actual labeling or accessories included. These are are intended
to illustrate technique only.