Filter
Top Products
93
System Setup
Setting items Setting details
Other
Network function on/off
setting during standby, and
PC language setting.
Network Standby : Set the network function on/off during standby.
•ON : Network is on during standby. Main unit operable with a network
compatible controller.
•OFF : Suspend network function during standby.
Set to “ON” when using the web control function.
NOTE
When “Other” – “Network Standby” is set to “ON”, it consumes
more standby power.
Character : When characters are not displayed correctly, set the MP3 ID3-
Tag character code type reproduced by the USB memory device.
•Auto : Auto-select character code.
•Latin : Select ISO 8859-1 Latin-1.
•Japanese : Select Shift-JIS.
If the characters are not properly displayed when set to “Auto”, set to
“Latin” or “Japanese”.
PC Language : Select computer environment language.
•Arabic / Chinese(simplified) / Chinese(traditional) / Czech / Danish /
Dutch / English / Finnish / French / German / Greek / Hebrew /
Hungarian / Italian / Japanese / Korean / Norwegian / Polish /
Portuguese / Portuguese(Brazil) / Russian / Spanish / Swedish /
Turkish
Friendly Name : The Friendly Name is the name of this unit displayed on
the network. Up to 63 characters can be input. The default Friendly Name
on first use is “DENON:[AVR-2112CI]”.
•For character input, see page76.
Default : Restores Friendly Name, which you had changed, to the default
setting.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
When you select “Default” and press ENTER,
the “Return settings to the default?” prompt
is displayed. Select either “Yes” or “No”, and
press ENTER.
Setting items Setting details
Other
(Continued)
Party Mode : Set the Party Mode.
Party Mode : Set the Party Mode function.
•ON : Enable party mode function.
•OFF : Disable party mode function.
Refer to page65, “Party mode function” for more information on
the party mode function.
Party Start Lev. : Make settings for volume level when the party mode
is started.
•Last : The same volume as set before the party mode was started.
•– – – (0) : Always use the muting on condition when the party mode is
started.
•–80dB – 18dB (1 – 99) : Start party mode with your preferred volume.
•This can be set when “Party Mode“ is set to “ON“.
•This is displayed from 0 to 99 when “Volume Display” (vpage95)
is set to “Absolute”.
•You can set to the upper limit set with “Volume Limit” (vpage95) .
Zone Management : See “Zone Management function” (vpage66).
Basic version
Advanced version
Information
Advanced version
vSee overleaf
BD