Filter
Top Products
3.Onceacutisbegunandanotchisestablishedintheworkpiece,
donotchangetheangleofthecut.Changingtheanglewillcause
thewheeltobendandmaycausewheelbreakage.
4.Removethetoolfromworksurfacebeforeturningtooloff.Allow
thewheeltostoprotatingbeforelayingthetooldown.
MAINTENANCE
_WARNING: To reduce the risk of injury, turn unit off
and disconnect it from power source before installing and
removing accessories, before adjusting or when making
repairs. An accidental start-up can cause injury.
Cleaning
WARNING: Blow dirt and dust out of all air vents with clean, dry air
at least once a week. To minimize the risk of eye injury, always wear
ANSI Z87.1 approved eye protection when performing this.
i_ WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool These chemicals may
weaken the plastic materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid get
inside the tool,"never immerse any part of the tool into a liquid.
Accessories
_WARNING: Since accessories, other than those offered by
DEWALT, have not been tested with this product, use of such
accessories with this tool could be hazardous. To reduce the risk of
injury, only DEWALT recommended accessories should be used with
this product.
BAIL HANDLE
This accessory provides a wider range of holding positions when
grinding and is particularly useful when surface grinding concrete.
ANTI-VIBRATION SIDE HANDLE
The anti-vibration side handle reduces vibration and user fatigue in
extended use applications.
GEAR CASE GRIP
The gear case grip is a soft grip cover used only for pipeline grinding
and wire brushing where the edge of the wheel is used for grinding
and cleaning and precise control is needed to ensure accuracy.
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory, please contact DEWALT
Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286,
call 1-800-4-DE.:.WALT(1-800-433-9258) or visit our website: www.
dewalt.com.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a DEiWALT factory service center, a DEWALT
authorized service center or other qualified service personnel. Always
use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
,, WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
, CONFIRMATION OF OWNERSHIP: In case of an insurance
loss, such as fire,flood or theft, your registration of ownership will
serve as your proof of purchase.
21