Filter
Top Products
Controls - 26 PR95 Operator’s Manual
Power Unit
CMW
4. Rod makeup engage
control
To turn on hydraulic flow to
rod makeup device, press.
5. Rod makeup standby
control
To stop hydraulic flow to rod
makeup device, press.
6. Throttle To increase engine speed,
push up.
To decrease engine speed,
pull down.
7. Bursting unit manual
control
In push mode:
To return carriage to back of
unit, pull.
To push rod into pipe, push.
In pull mode:
To pull new pipe through pipe,
pull.
To return carriage to front of
unit, push.
Use in sequence with rear jaw manual
control to push and pull rods from
power unit control station.
Push sequence:
• push jaw manual control
• push bursting unit manual control
• pull jaw control
• pull bursting unit control
Pull sequence:
• push bursting unit manual control
• push jaw manual control
• pull bursting unit control
• pull jaw control
8. Rod makeup manual
control
To engage hydraulics to rod
makeup device, pull and hold.
To disengage hydraulics,
release.
9. Rear jaw manual
control
In push mode:
To close jaws, pull.
To open jaws, push.
In pull mode:
To close jaws, push.
To open jaws, pull.
Use in sequence with bursting unit
manual control to push and pull rods.
See “Bursting unit manual control” for
sequence.
Item Description Notes