Filter
Top Products
Prepare - 32 PR95 Operator’s Manual
Inspect Site
CMW
Identify Hazards
• Identify safety hazards. Follow U.S. Department of Labor regulations on excavating and trenching
(Part 1926, Subpart P) and other similar regulations.
• Have an experienced locating equipment operator sweep area within 20’ (6 m) to each side of burst
path. Verify previously marked line and cable locations.
• Mark location of all buried utilities and obstructions.
Jobsite hazards could cause death or serious injury. Use
correct equipment and work methods. Use and maintain proper safety
equipment.
NOTICE:
• Wear personal protective equipment including hard hat, safety eye wear, and hearing protection.
• Do not wear jewelry or loose clothing.
• Notify One-Call and companies which do not subscribe to One-Call.
• Comply with all utility notification regulations before digging or bursting.
• Verify location of previously marked underground hazards.
• Mark jobsite clearly and keep spectators away.