Filter
Top Products
Dukane Manual Part No. 403-570-01
Page 55
Section 6 - Machine Operation
Stopping a Weld
Cycle
During normal operation, the cycle stops automatically
when the specied weld and hold phases are completed
and the press returns to the top-of-stroke position. To
stop a cycle before it completes, press the E-stop switch
on the base, which terminates the cycle and causes
power to be removed from both servo motors.
Setup Sheet
On the following page is a table containing all the
machine settings for the Dual Servo Spin Welder. An
electronic version is provided on the CD included with
the machine.