Dukane 403-570-01 Welder User Manual


 
Dual Servo Spin Welder User’s Manual
Dukane Manual Part No. 403-570-01Page 74
Welder
Mechanical
The part xture should be securely mounted
perpendicular to, and centered under the spin axis.
Electrical Power
Make sure the AC power cord is plugged in to a 240
VAC, 1–phase electrical outlet with a 20 Ampere
capacity. Check that the circuit is live. Also refer to
Electrical Safety in Chapter 2.
Base Interface Cable
The cable must be plugged in to the base and the back
of the press. If the cable is not plugged in, or has a fault,
the base switches will not initiate any action, and the
ABORT and POWER indicators on the base status
display will not function.
Machine Display
Messages
A list of all machine messages, their meaning, and
possible solutions to problems are given in Table 9-II.