Filter
Top Products
Dukane Manual Part No. 403-570-01
Page 93
Section 12 - Specications
CAUTION
DO NOT make any modifica-
tions to the Dual Servo Spin
Welder. The changes may re-
sult in violating one or more
regulations under which this
equipment is manufactured.
CE Marking
This mark on your equipment certies that it meets the
requirements of the EU (European Union) concerning
interference causing equipment regulations. CE stands
for Conformité Europeéne (European Conformity). The
Dual Servo Spin Welder complies with the following
CE requirements.
• The EMC Directive 89/336/EEC
• The Low Voltage Directive 73/23/EEC.
• The Machinery Directive 89/392/EEC using
EN60204–1:1993 Safety of Machinery – Elec-
trical Equipment of Machines. Part 1: Specication
for General Requirements.
Regulatory Agency
Compliance
Identication Numbers
Welder Model & Serial
Number
The serial number and model number tag for the Dual
Servo Spin Welder are located either on the covers
on the back of the machine or on the underside of the
motor mounting plate just above the tooling hub.
Effective 12/29/09:
The Machinery Directive 2006/42/EC.
EN 60204: 2006
Safety of Machinery - Electrical Equipment
of Machines Part 1: General Requirements.