Emerson IP2046IM Laser Level User Manual


 
43
IP2046/IM
Nov 2006
APPENDIX C
LISTING OF NON-LINEAR PROFILES IN THE MSP400
Screen
Display
Description Hmax
used
K Factor * or
Flo @ max.
Power
Factor
20mA point if
auto-set
Lin Linear - User 1.0 -
SPEC.P Special (plotted) - User User As P013
H. CYL.F Horiz. Cyl. (Flat) - User User As P013
SPH. Spherical - User User As P013
H. CYL.D Horiz. Cyl. (Dome) - User User As P013
3/2 Flume (3/2) - User 1.5 User
5/2 V-Notch (5/2) - User 2.5 User
nnann
a
Manning Formula - User User As P013
SPEC.C Special (calculated) - User User User
mftMetricImp. m
3
/hr gal/min
PAr 1 Parshall 1 (1’) 0.75 2.5 2487 1795 1.522 1610 7240
PAr 2 Parshall 2 (2’) 0.75 2.5 5143 3590 1.550 3290 14900
PAr 3 Parshall 3 (3’) 0.75 2.5 7863 5386 1.566 5010 22600
PAr 4 Parshall 4 (4’) 0.75 2.5 10630 7181 1.578 6750 30500
PAr 5 Parshall 5 (5’) 0.75 2.5 13440 8976 1.587 8510 38400
PAr 6 Parshall 6 (6’) 0.75 2.5 16280 10770 1.595 10300 46400
PAr 8 Parshall 8 (8’) 0.75 2.5 22010 14360 1.607 13900 62600
FF 01 Flume Flat 1 (m) 0.102 134.7877 1.5 9
FF 02 Flume Flat 2 (m) 0.191 178.2664 1.5 36
FF 03 Flume Flat 3 (m) 0.267 313.4177 1.5 90
FF 04 Flume Flat 4 (m) 0.406 541.7157 1.5 360
FF 05 Flume Flat 5 (m) 0.635 811.1058 1.5 900
FF 06 Flume Flat I 0.200 132.2 1.5 30
FF 07 Flume Flat II 0.250 177.7 1.5 60
FF 08 Flume Flat III 0.300 217.58 1.5 90
FF 09 Flume Flat III bis 0.3333 328.35 1.5 200
FF 10 Flume Flat III ter 0.400 272.0 1.5 200
FF 11 Flume Flat IV 0.400 352.1726 1.5 180
FF 12 Flume Flat V 0.500 442.932 1.5 360
FF 13 Flume Flat V bis 0.400 400.5 1.5 320
FF 14 Flume Flat VI 0.540 499.0569 1.5 720
FF 15 Flume Flat VII 0.700 623.7 1.5 1080
FF 16 Flume Flat VIII 0.600 881.16 1.5 1440
FF 17 Flume Flat VIII bis 0.666 798.0 1.5 1500
FF 18 Flume Flat IX 0.800 1065.186 1.5 1800
FF 19 Flume Flat IX bis 0.733 814.8 1.5 1700
FF 20 Flume Flat X 0.867 1322.2761 1.5 3600
FF 21 Flume Flat X bis 1.200 1609.0 1.5 7500
FF 22 Flume Flat X ter 0.959 1064.884 1.5 3500
FF 23 Flume Flat XI 1.200 1650.99 1.5 7200
FP 01 Flume Parabolic 1 0.200 15878.5 2.3 20
FP 02 Flume Parabolic 2 0.250 17591.1 2.3 40
FP 03 Flume Parabolic 3 0.310 11645.6 2.2 90
FP 04 Flume Parabolic 4 0.380 13669.5 2.2 180
FP 05 Flume Parabolic 5 0.460 9802.7 2.1 360
FP 06 Flume Parabolic 6 0.600 11367.8 2.1 720
FP 07 Flume Parabolic 7 0.800 12227.7 2.1 1400
Notes :
i). SPEC.P and SPEC.C ONLY DISPLAY IF POPULATED BY EXTERNAL MASTER. Refer to Section
4.4.4.1.
ii). Where shown “User” indicates user required to input the appropriate data.