Filter
Top Products
5 – 19
VSG/VSSG • Installation, Operation and Maintenance Manual •Vilter/Emerson • 35391SSG
Gate Rotor and Support Clearance
When measuring, push the gate rotor against the pin to
remove fl oat.
1. Place a straight edge along the side of the gate ro-
tor, see Figure 5-16.
2. Measure the gap from the straight edge to the peak
of the gate rotor support. For minimum distance,
see Figure 5-15.
3. Repeat steps 1 to 2 to check gap along entire gate
rotor edge on both sides.
Section 5 • Maintenance/Service
Figure 5-15. Gate Rotor and Support Clearance - Minimum Clearances