Filter
Top Products
Configuration and Management
• The “NETWORK INFORMATION” section where the most important
connection status information is collected. This information (among
others) is also found on the Internet and LAN web pages respectively.
Each page in the WUI also includes a Logout button (above the left-hand
menu).
2.2.1 Change Default Password
For security reasons you are recommended to change the preconfigured
password.
Follow the steps below to change the password:
1. Click the Change Password button on the Overview page. The
Change Password page is displayed:
Figure 7 - Change Password page
2. Type the current password in the “Current Password” field. If it is the
first time you change the password, the password is user.
3. Type a new password in the “New Password” and “Retype New
Password” fields. A password can include up to eight (8) characters
(letters and/or numbers).
Note: The password is case-sensitive (distinguish between
uppercase and lowercase letters).
4. Save the new password by clicking OK .
2.2.2 Alarms
The “ALARMS” section on the Overview page includes detected active
error conditions.
1/1551-CRH 102 167 Uen Rev E 2008-02-15
11