Filter
Top Products
Configuration and Management
If enabled, the APN (Access Point Name) is
automatically configured based on information on the
SIM card.
Auto APN
The 3G Access Point Name, which is a reference to
the UMTS Internet access point on the service
provider’s network. The APN usually has the format
<name.service_provider.country>.
APN (3G)
The 2G Access Point Name, which is a reference to
the GSM Internet access point on the service
provider’s network. The APN usually has the format
<name.service_provider.country>.
APN (2G)
The Point-to-Point Protocol Internet mode user name,
which is used for user authentication.
PPP user name
The Point-to-Point Protocol Internet mode password,
which is used for user authentication.
PPP password
The authentication protocol (PAP or CHAP) to be
used when PPP is used for authentication.
Authentication
Protocol
If you have not used the Configuration Wizard for configuration of Internet
access, or authentication is required because of a reset to factory default
configuration, fill in the appropriate fields and click Apply to save the
settings.
Note: Only enter details you have received from your service provider
and leave other fields empty.
2.4.3.1 Unblock SIM Card
If three attempts have been made with an incorrect PIN, the SIM card is
blocked and the Unblock SIM button is displayed beside the “PIN” field.
The PUK code is needed to unblock the SIM card. Click the Unblock SIM
button to display the Unblock SIM page:
Figure 24 - Unblock SIM page
1/1551-CRH 102 167 Uen Rev E 2008-02-15
29