Filter
Top Products
MFT/3-Kapex Table
495 565
The MFT/3-Kapex work support table is
specifically designed for use with the Kapex
saw. It is slightly shorter than a standard
MFT/3 and also has additional mounting holes
for placing the saw. The saw may be positioned
close to the front edge, close to the rear edge,
more to the left, or more to the right.
The height of the MFT/3-Kapex is lower so the
Kapex is at a more comfortable working height.
This height also coincides with the height of a
standard MFT/3, which can be used as
workpiece support tables.
Bolt Down (Clamping) Kit
494 693
The bolt down kit includes bolts and threaded
knobs for quickly securing the Kapex saw to a
Multi Function Table.
Crown Stop
494 369
The crown stop is used to support the forward edge of
crown moulding when cutting the moulding tilted against
the fence for making non-compound miter cuts.
Supplemental User’s Manual 31