Filter
Top Products
Page 2 / 27 R526A_UG_Rev1.0_EN_29032012
Thank you for purchasing the Franklin Wireless R526A portable router. This device doesn’t need wires, cables, or
software to configure it through your Web browser.
This guide describes the browser Interface that allows you to configure the R526A. For information about setting
up your device, device maintenance and care, etc., consult the printed Quick Start Guide that came with your
device.
We recommend you read this manual before using the R526A.
Part 1
Using the R526A
Charging the R526A Device
Note.
The battery should be fully charged before using the R526A for the first time. We recommend an initial charge time
of approximately 2 hours. When fully charged, a solid green light will appear next to ‘Power’ display on the device.
A red or orange light indicates you need to re-charge. Included in your R52A6A package is an AC-Adapter.
Alternatively, you can use a USB cable to charge/re-charge your device (sold separately).
Opening the Browser Interface
How to Connect to the R526A (Windows Users – for MAC Instructions see the next section)
1. Turn on the R526A and ensure your WiFi is enabled on your PC or laptop. You can view your available wireless
networks by going through the control panel, network connections or system tray (lower right hand corner of your
screen).