Genesis I.C.E. GBDS450 Cordless Sander User Manual


  Open as PDF
of 44
 
English
Belt/Disc Sander
Operator’s Manual GBDS450
SPECIFIC SAFETY RULES FOR BELT/DISC SANDERS
WARNING: DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT
SAFETY RULES. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury!
•Makesurethebelt/discsanderisonarm,levelsurfaceand
properly secured toavoidinjuryfromunexpectedmovement.
• Unplug the tool before making adjustments, repairs, maintenance
or storing.
•Alwaysswitchoffthetoolbeforeunpluggingittoavoidaccidentalstarting
whenrepluggingthetoolintoapowersource.
•Weareyeprotectionanddustmask.
•Donotoperatethesanderuntilitisassembledandinstalledaccordingtothis
manual’sinstructions.
•Donotusethetooliftheswitchdoesnotturnitonandoff.Defectiveswitchesshouldbe
immediatelyreplacedbyanauthorizedservicecenterandthemachinenotusedunderrepairs
arecompleted.
•Alwayssupportworkpiecewithmitergauge,worksupportor
table.
•Keepngersawayfrompinchpointsbetweenhousingandsandingbeltordisc.
•Maintain1/16in.(1-2mm)clearancebetweentableandsandingbelt
or disc.
•Maintainproperadjustmentofsandingbelttensionandalignment.
•Neversandmorethanonepieceatatime.
•Alwaysfeedtheworkpiecefromlefttorightagainstthedirectionthesanding
beltisrotating.
•Useextracautionwithlarge,verysmallorawkwardworkpiece.Neverusethistool
tosandapiecetoosmalltoholdbyhand.
•Avoidawkwardoperationsandhandpositionswhereanunexpectedor
suddenslipthatcouldcauseyourhandorngerstomoveintothesandingbeltordisc.
•Neverstandinlinewiththepathofworkpiece.
•Donotoperateinrainorindamplocations.
•Groundingrequired.
SAVE THESE INSTRUCTIONS
 previous next