Gianni Industries DG-600 Welding System User Manual


  Open as PDF
of 6
 
Copyright Gianni Industries, Inc. All Rights Reserved.
P-MU-DG600 Ver. B Publish:2004.08.27 Page: 1/ 6
DG-600 Standalone Proximity Reader
Operation User's Manual
I. Product Characteristic:
DG-600 has a 600 cards and PIN codes capacity and a reading time of 0.5-second max.
Transmitted to the host with extended Wiegand format auxiliary reader.
The Unit will operate with card only, PIN or card, PIN + card.
The logical memory does not allow duplicate cards to be programmed.
The host unit will lockout for 60 seconds if 5 incorrect password attempts are entered.
Beeper sound gives positive signal of all keypad activations.
Build in tamper switch that turns on alarm relay to ensure vandal proof operation.
Non-volatile memory stores all programmed information for at least 10 years, even in the
event of total power failure.
Removable memory chip in the main control module allows on site replacement in the
event of break down.
Fully Programmable via keypad and master code
next