Filter
Top Products
12
Operation
Making a straight cut
1. Adjust the rip fence (15) to the desired width from the
blade using the scale (12) on top of the table for reference.
2. Secure the rip fence to the table by lowering the rip
fence locking lever (16).
3. Firmly position the tile against the rip fence and pass
through the blade in a smooth action.
Note. Do not force the tile into the blade too quickly or
with excessive force, allow the blade to do the work.
Making a mitre cut
1. Fit the mitre gauge assembly (17) over the rip fence.
2. Choose the desired mitre angle and tighten the mitre
gauge locking knob (18).
3. Place the tile into the mitre gauge and hold it firmly in
position.
4. Push the mitre gauge together with the tile towards
and into the blade.