Filter
Top Products
2
Contents
Warranty Power Tools
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
This product is warranted for a 2-year period for home
domestic use from the date of the original purchase.
If found to be defective in materials or workmanship,
the tool or the offending faulty component will be repaired
or replaced free of charge with another of the same item.
A
small freight charge may apply. Proof of purchase is
essential. We reserve the right to reject any claim where
the purchase cannot be verified.
This warranty does not include damage or defects to the
tool caused by or resulting from abuse, accidents,
alterations or commercial or business use. It also does not
cover any bonus items or included accessories. Only the
power tool is covered under this warranty.
With continuing product development, changes may have
occurred which render the product received slightly
different to that shown in this instruction manual.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty. For full details of
the warranty terms and conditions please refer to our
website – www.gmcompany.com
For prompt service we suggest you log your service
request online - www.gmcservice.com.au, should you
not have access to the internet, please contact our
service department on 1300 880 001 (Australia)
or 0800 445 721 (New Zealand).
Warranty 2
Introduction 3
Environmental protection 3
Description of symbols 3
Specifications 3
Safety rules for laser lights 4
General safety instructions 4
Additional safety rules for band saws 5
Unpacking 6
Know your product 6
Components 8
Assembly 8
Mounting to a workbench 9
Lower blade guide adjustment 10
Housing doors 11
Adjusting the rip fence 11
Adjusting the mitre gauge 11
Adjusting the bevel angle 11
Adjusting the saw blade tension 12
Adjusting the blade tracking 12
Dust collector connection 12
Turning on and off 13
Turning the laser on and off 13
Turning the LED lights on and off 13
Removing and installing band saw blades 13
Operation 14
Using the REDEYE
®
laser line generator 14
Power cord maintenance 15
Cleaning 15
General inspection 15
Troubleshooting 16