Filter
Top Products
• Support the work properly.
• Never reach over the blade to remove waste or off cuts.
• Do not attempt to free a jammed blade before first
switching off the machine.
• Do not slow or stop a blade with a piece of wood. Let
the blade come to rest naturally.
• If you are interrupted when operating the saw,
complete the process and switch off before looking up.
• Periodically check that all nuts, bolts and other fixings
are properly tightened.
• Do not store materials or equipment above a machine
in such a way that they could fall into it.
• Ensure that your work is always on the table. Never
make a cut with the work off the table.
• Wear goggles
• Wear hearing protection
• Wear a breathing mask
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
Accessories
The GMC Laser Band Saw is supplied with the following
accessories:
• Work table
• 1400mm x 6.35mm x 0.35mm band saw blade
– 6TPI (a).
• Rip fence (b).
• 3 x 16mm x M6 screws with matching washers
and nuts (c).
• 2 x 20mm x M6 screws with matching thumb nuts and
U shape bracket (d).
• 3mm Allen key & 4mm Allen key (e).
• Open ended spanner – 13mm x 10mm (f).
• 2 x AA batteries
6
a. b.
c. d.
e. f.