Filter
Top Products
Accessories
14 332198C
Accessories
Restrictors
249765 Restrictor Kit
Includes one each of restrictor sizes 0.018, 0.024,
0.032, 0.040, 0.062, and 0.094 in., one plug with no
restriction, package of 10 screens, and package of 6
o-rings.
15E370 Plug
Fits restrictor port, but with minimal restriction. Uses
249036 O-ring Kit.
249036 Restrictor O-ring Kit
Package of 6.
249037 Restrictor Screen Kit
40 mesh. Package of 10.
15K652 PTFE Night Cap
Partially fill with ISO pump oil or ISO pump grease to
protect outlet manifold (6) from air and moisture.
217374 ISO Pump Oil
1 pint (0.5 liter) container.
106565 ISO Pump Grease
14.6 oz (0.4 kg) cartridge
255247 Ratio Check Nozzle
Use with retainer nut 512292.
246385 Pump Inlet Strainer
Use to strain material before it enters proportioner.
Gun Length Reduction
To reduce the overall length of the gun from 47 in.
(1194 mm) to 24 in. (610 mm), purchase two of each of
the following fittings: 503279 and 151243. Use these fit-
tings to replace fittings (4) and tubes (5).
Standard Disposable Mixer
Alternate Disposable Mixers
Use retainer nut 512291 for 1/2 in. (13 mm) OD and
smaller mixers.
† Use retainer nut 512292 for 5/8 in. (16 mm) OD and
smaller mixers.
15E372 0.018 in. Orifice Restrictor
15E373 0.024 in. Orifice Restrictor
15E374 0.032 in. Orifice Restrictor
15E375 0.040 in. Orifice Restrictor
15E376 0.062 in. Orifice Restrictor
15E377 0.094 in. Orifice Restrictor
512289† 1/2 in. (13 mm) ID x 5/8 in. (16 mm) OD
x 30 element.
120042 1/4 in. (6 mm) ID x 3/8 in. (10 mm) OD x
24 element; package of 50.
512014 1/4 in. (6 mm) ID x 3/8 in. (10 mm) OD x
32 element.
512016 3/8 in. (10 mm) ID x 1/2 in. (13 mm) OD
x 24 element.
512017 3/8 in. (10 mm) ID x 1/2 in. (13 mm) OD
x 30 element.
551979† 1/2 in. (13 mm) ID x 5/8 in. (16 mm) OD
x 36 element.
512291 Retainer Nut for 1/2 in. (13 mm) OD and
smaller mixers.
512292† Retainer Nut for 5/8 in. (16 mm) OD mix-
ers.