Graco 262612 Paint Sprayer User Manual


 
Outlet Valve Repair
3A1698F 25
Outlet Valve Repair
NOTE: Before doing any repair to pump, perform
Flushing Sprayer procedure, page 16.
Removal
1. Engage trigger lock and pull prime/pressure relief
valve UP to release pressure.
2. Remove battery.
3. Remove pump outlet cap.
4. Use tool (supplied) to loosen and remove outlet
valve fitting. Make sure old o-ring, seat, outlet valve,
and spring are out of pump outlet cavity.
Installation
1. Screw outlet valve fitting into threads. Use tool
(supplied) and tighten to 8 ft-lb.
2. Press pump outlet cap into place.
Move sprayer to a non-hazardous area before servicing.
ti16699a ti16700a
ti14996a
ti16745a
ti15503a
ti16749a
Outlet cap prevents the discharge of static electricity.
Always replace outlet cap after installing outlet valve.
ti15506a
ti16748a
ti15508a
ti16750a
ti15507a
ti16751a