Filter
Top Products
Common Procedures
3A1698F 9
Common Procedures
Trigger Lock
Prime/Pressure Relief Valve
Position
Pressure Relief Procedure
4. Engage trigger lock.
5. Put prime/pressure relief valve UP to release pres-
sure.
Spray Tip Position
Always engage the trigger lock when you stop spraying
to prevent the sprayer from being triggered accidentally
by hand, or if dropped or bumped.
ti14994a
Trigger Locked
Trigger Unlocked
ti14995a
(red ring is visible)
ti16698a
ti16699a
UP position
(For priming and releasing
DOWN position
(Ready to spray)
ti14999a
pump pressure)
ti16700a
ti16701a
Do not operate or spray near children. Do not aim the
sprayer at, or spray any person or animal. Keep hands
and other body parts away from the front of the
sprayer. For example, do not try to stop the paint flow
with any part of the body.
This sprayer builds up an internal pressure of 1,700 psi
during use. Follow this Pressure Relief Procedure
whenever you stop spraying and before cleaning,
checking, servicing, or transporting equipment to
prevent serious injury.
Always perform Pressure Relief Procedure before
adjusting spray tip position.
ti16699a
ti14999a
ti16700a
Tip Forward
(SPRAY position)
Tip Reversed
(UNCLOG position)
ti14991a
ti14985a
ti15510a
ti16992a
ti14991a
ti15510a