Filter
Top Products
Setup
10 309915D
Wetting Hose
Wet inside of hose before each use
to flush out sediment and prevent
texture material from packing out
hose.
1 Pour one (1) gallon (3.8 liters)
of clean water into hopper.
2 Close gun air valve (23). 3 Start engine, page 15. Aim gun
into hopper (G) and trigger gun
to circulate water for a few min-
utes to wet inside of material
hose.
4 Trigger gun into waste pail until
hopper no longer contains
water.
5 Open gun air valve (23) to
relieve compressor air.
water
ti3898a
closed
ti4005a
23
ti3903a
WASTE
ti4290a
TI
23