Filter
Top Products
Warnings
2 309915D
The following Warnings are for the safe setup, use, grounding, maintenance and repair of this equipment.
The exclamation point symbol alerts you to a general warning and the hazard symbols refer to
procedure-specific risks. Refer back to these Warnings.
Warning
Caution
WARNING
This symbol alerts you to the possibility of seri-
ous injury or death if you do not follow the
instructions.
CAUTION
Alerts you to the possibility of damage or destruction
of equipment if you do not follow the instructions.
Warnings
Fire and Explosion Hazard
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
• Use equipment in well ventilated areas only.
• Do not fill fuel tank while motor is running or hot; shut off motor and let it cool. Fuel is flammable and
can ignite or explode if spilled on hot surface.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electrical lamps, and plastic
drop cloths (potential static arc).
• Keep work area free of debris, including solvent, rags, and gasoline.
• Do not plug or unplug power cords or turn lights on or off when flammable fumes are present.
Carbon Monoxide Hazard
Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon mon-
oxide can cause death. Do not operate in an enclosed area.
Equipment Misuse Hazard
Equipment misuse can cause death or serious injury.
• Do not exceed maximum working pressure or temperature rating of lowest rated system compo-
nent. See Technical Data, in all equipment manuals.
• Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all
equipment manuals. Read fluid and solvent manufacturer’s warnings.
• Check equipment daily. Repair or replace worn or damaged parts immediately.
• Do not alter or modify this equipment.
• Use the equipment only for its intended purpose. Call your Graco distributor for information.
• For professional use only.
• Route hoses away from traffic areas, sharp edges, moving parts and hot surfaces.
• Do not use hoses to pull equipment.‘
• Comply with all applicable safety regulations.