Filter
Top Products
Shutdown and Cleanup
309915D 19
Shutdown and Cleanup
CAUTION
English
• Turn off sprayer if you are going to stop spraying for 5 minutes or longer.
• Before removing material hose relieve pressure and material is not in hose.
• To keep sprayer in good operating condition, always clean it thoroughly and prepare it properly for storage.
• If water freezes in sprayer, damage may occur. Inn cold weather store sprayer where it will not freeze.
When you have finished spraying:
1 Relieve Pressure, page 6.
2 Fill material hopper with 2-4
gallons of clean water.
3 Spray inside material hopper
to circulate water through gun
and hose. While circulating
water, use gun to clean mate-
rial hopper.
Spray water into waste bucket to
empty material hopper.
NOTE: A soft brush can be used to
loosen dried on material
4Follow Pressure Relief, page
6.
ti4288a