Filter
Top Products
Operation / 操作
313483A 27
English
9. Run pump until clean-
ing ball exits material
hose. Save cleaning
ball (Base Coat Only).
10. Turn on/off switch OFF
and turn prime valve to
DRAIN. Clean outside
of pump and suction
tube with brush and
water.
11. Connect applicator to
material hose. Close
drain valve.
12. Turn on/off ON.
Base Coat Pump:
Turn on/off switch ON
and prime switch ON,
or applicator switch on
material hose.
中文
9. 让泵运转，直到清
洗球从料管中掉出。
保管好清洗球
（仅限底色漆）。
10. 关断通 / 断开关，然后
将填料阀旋转至泄压位
置。用刷子和水清洁泵
及吸料管的外表面。
11. 将喷涂器连接到料
管上。关闭泄压阀。
12. 接通通 / 断开关。
底色漆泵：接通通 /
断开关和填料开关，
或接通料管上的喷涂
器开关。
ti4551c
ti10796b
ti13633a
ti13636a
ti10795b