Filter
Top Products
Repair / 修理
313483A 75
English
5. Rotate pump until
transducer port is
aligned directly to back
of sprayer. Connect
transducer and hand
tighten securely.
NOTE: Clean out ALL
media and debris from
transducer and trans-
ducer port before con-
necting transducer.
6. Tighten latch and
rotate latch lock into
locked position.
7. Top Coat Pump:
Attach drain hose to
sprayer.
8. Fill pump with Graco
TSL until fluid flows
onto top of seal.
中文
5. 转动泵，直到传感器端
口直接对准喷涂机的背
后。连接传感器并用手
牢固拧紧。
注释： 连接传感器之前
要清除传感器上和传感
器端口内的所有介质和
污物。
6. 拉紧插销，并将插销的
扣锁旋入锁定位置。
7. 面漆泵：将回流管装到
喷涂机上。
8. 给泵注入 Graco 喉管
密封液 （TSL）直到液
体流到密封件的顶部时
为止。
ti13729a
ti6312a
ti6204a
ti7330a
ti5493a