Filter
Top Products
Selection Charts
8 313869B
Air Caps
* Maximum compliant HVLP inlet pressure.
Sample Pattern Sizes and Shapes
* Fluid viscosity for these samples was 30 centipoise.
Needle Assembly Identification
Air Cap
Part No. Type
Nozzle Orifice Recommended
Gun/Manifold
Inlet Pressure
psi (MPa, bar) Air Cap Colorin. mm.
24C182 Conventional 0.028-0.059 0.7-1.5 43 (0.3, 3.0) Blue-Grey
24C183 HVLP 0.020-0.051 0.5-1.3 15 (0.1, 1.0)* Pewter
24D703 HiTEch 0.028-0.039 0.7-1.0 29 (0.2, 2.0) Black
24D704 HiTEch 0.059 1.5 29 (0.2, 2.0) Black
24C184 LVMP 0.020-0.059 0.5-1.5 43 (0.3, 3.0) Brown
24D705 Air Brush 0.028 0.7 29 (0.2, 2.0) Clear
Air Cap
Part No. Type
Nozzle
Orifice
in. (mm)
Recommended
Gun/Manifold
Inlet Pressure
psi (MPa, bar)
Fluid* Flow
Rate
oz/min (cc/min)
Spray
Distance
in (cm)
Pattern
Shape
Pattern Size*
in. (mm)
24C182 Conventional 0.028 (0.7) 43 (0.3, 3.0) 2.7 (80) 6 (15) Taper 1.0-6.0 (25-152)
24C183 HVLP 0.028 (0.7) 15 (0.1, 1.0) 2.7 (80) 6 (15) Straight 1.0-6.5 (25-165)
24D703 HiTEch 0.028 (0.7) 29 (0.2, 2.0) 2.7 (80) 6 (15) Straight 1.0-6.5 (25-165)
24D704 HiTEch 0.059 (1.5) 29 (0.2, 2.0) 2.7 (80) 6 (15) Straight 1.0-6.5 (25-165)
24C184 LVMP 0.028 (0.7) 43 (0.3, 3.0) 2.7 (80) 6 (15) Straight 1.0-6.5 (25-165)
24D705 Air Brush 0.028 (0.7) 29 (0.2, 2.0) 1.0 (30)
2 (5)
Round
0.5 (13)
4 (10) 0.6 (15)
6 (15) 0.7 (19)
Part Needle Assembly Size # of Grooves
24C190 0.5 mm 1
24C191 0.7 mm 2
24C192 0.9 mm 3
24C193 1.1 mm 4
24C194 1.3 mm 5
Grooves
ti14043a